P93 Rectangular Printing Pad

Brand, size and fixed care information can be printed directly inside a T-shirt neckline instead of on a sewn-in label. In pad printing, the artwork is prepared on a printing plate and a silicone pad transfers suitable ink onto the fabric. Distance from seams, fabric absorbency and drying conditions are determined together.

Logos and size information can be pad printed onto a flat area inside a vest neckline. Movement in cotton or blended knit fabrics affects definition. A support that holds the garment without excessive tension and an appropriate ink help achieve consistent transfer of small text.

Garment shape and print position are considered together when printing brand, size and care information directly onto underwear. Boxer shorts, vests and briefs may differ in fabric and stretch. Each product therefore requires sample printing to determine its fixture, ink formulation and drying arrangement.

Size and brand information can be printed directly inside the neck or another suitable inner area of baby clothing. Legibility and print feel are assessed together on soft fabrics. Current technical and conformity documents for the ink are reviewed against contact conditions and the customer’s specification when defining the process.

Fibre structure and absorbency affect ink spread and fine detail on cotton. Logos or fixed information are prepared on a printing plate and transferred using a suitable pad. Printing force, ink consistency and drying conditions are tested on the actual fabric to assess legibility and adhesion after washing.

The open, flexible structure of knitted fabric can make small text appear broken or blurred. Transfer is controlled using a fixture that holds the fabric evenly and suitable pad contact. Artwork detail, printing pressure and ink consistency are adjusted together and assessed through sample printing.

In blends such as cotton-polyester, knit structure and surface treatments affect transfer alongside fibre ratios. Ink, pad and drying conditions are selected using an actual fabric sample. When the supplier or fabric specification changes, production settings are verified on the new batch.

When the same garment is produced for different brands, fixed logos and size artwork can be managed with separate printing plates. Records of plates, colours and print positions simplify brand changes. Serial numbers or barcodes that change with every impression require a different solution from pad printing with a fixed plate.

The 99 mm × 99 mm body and 99 mm height of P93 are assessed together with the clearance around the artwork. Small-text placement, pad compression and fabric support are checked in the same trial. Suitability is established with the actual plate and product rather than the model number or external dimensions alone.

The specified wooden base is 114 mm wide and 114 mm long; this model has no core. Compare these dimensions with the machine’s pad holder, mounting arrangement and operating clearance. The fixture is prepared considering seams or raised areas at the print position together with pad geometry.

P93 is available in Type 01 and Type 05 silicone with Shore OO and Shore A hardness options. Softness alone does not determine quality: deformation, fabric contact and ink release are assessed together. Numbers on different Shore scales cannot be compared as equivalent hardness values.

Size, brand and fixed care information can be printed inside a suitable neckline or waistband on pyjamas and loungewear. A flat support prevents fabric bunching. Softness requirements, small-text legibility and intended washing conditions are assessed together.

Size and brand information can be pad printed onto a suitable inner area of thermal underwear. Fabric stretch and surface structure affect adhesion and print feel. Samples are prepared for the intended use and washing conditions; drying settings also consider the fabric’s response to heat.

Small logos, symbols or short fixed text can be considered for woven tapes. Tape width, raised weave and support beneath the print determine definition. Positioning the tape in a fixture maintains alignment during repeated printing; ink is selected using the actual surface.

Fixed brand, size or orientation markings can be printed onto cut fabric pieces before sewing. A cut edge or defined reference is used for positioning in the fixture. A production sample confirms that the print will not overlap subsequent seams or folds.

Softening, silicone or water-repellent finishes can change ink adhesion. Two fabrics with the same fibre content may print differently, so an earlier formulation is not assumed suitable. A sample from the intended batch is tested for ink spread, drying and durability.

The grooves and stretch of ribbed fabric affect pad contact. Even support reduces unnecessary tension at the print position. Logo detail and text size are assessed against the texture, comparing the print in relaxed and stretched states.

Fixed washing, drying and other care symbols can be pad printed onto suitable textile areas. Line thickness and spacing must remain legible at the selected size. Content follows the manufacturer’s approved product information, and the sample is checked before plate preparation.

Fixed fibre composition and short product information can be printed inside a suitably sized neckline or garment area. Line count and text size are planned with the fabric texture. Plates and production records are organised by product to prevent mixing up text for different fabric blends.

The ink’s specified drying and waiting time must be completed before assessing wash resistance. Temperature, detergent, drying method and cycle count are defined in advance. The original sample is compared with the washed print to assess adhesion, colour and preservation of fine detail.

Prints on elastic products should also be inspected under stretch. The sample is extended to reflect normal use and checked for cracking, lifting and distortion. The formulation is reassessed if ink flexibility or film thickness is unsuitable.

Line thickness, letter spacing and fabric texture are assessed together for small size and care text. Plate quality, pad contact and ink consistency affect fine-detail transfer. Artwork is considered ready for production only after a sample at the actual print size has been checked for legibility.

A product-specific fixture supports repeatable printing by holding fabric in a consistent position. Support is adapted where seams, elastic or folds raise the print area. Fabric is held without excessive tension and the position of logos and information is compared across the first and subsequent products.

Drying and any curing conditions follow the ink series’ technical data sheet. Fabric heat response and available production time are considered together. A touch-dry print may not have reached its final resistance, so the required waiting time is also included in the process.